CASTROL Tribol GR TT 1 PD
Industriefette und Pasten
Diese Produktbeschreibung ist auf Deutsch noch nicht vorhanden. Bitte nehmen Sie die Informationen von der englischen Version.
Tribol GR TT 1 PD is a high performance grease for applications with wide temperature ranges. It is especially suited for rolling and sliding bearings with medium bearing pressures.
The additive combination Microflux Trans in Tribol GR TT 1 PD adjusts to varying operating conditions and actively prevents wear.
The Tribol GR TT 1 PD can be applied:
- In rolling and sliding bearings.
- In clutch bearings and wheel hubs.
- For bearings running at high speeds wh an x dm factor up to about 1 mio.
- For low-temperature applications.
The application temperature range for Tribol GR TT 1 PD is between -60 °C (-76 °F) and +120 °C (+248 °F).
Typical characteristics:
Specification: KPE1K-60
Consistency grade: NLGI 1
Base oil type: synthetic
Thickener type: both organic and inorganic
Base oil viscosity at 40 °C (104 °F): 15 mm2/sec
Worked penetration, 60 strokes at 25 °C (77 °F): 310-340 (0.1 mm)
Dropping point: 300 °C (572 °F)
Flow pressure at -35 °C (-31 °F): 235 hPa
Oil separation, 168 hours at 40 °C (104 °F): 5.5 %wt
Tribol GR TT 1 PD was previously called CASTROL Optitemp TT 1. Its name was changed in 2015.
Tribol GR TT 1 PD is a high performance grease for applications with wide temperature ranges. It is especially suited for rolling and sliding bearings with medium bearing pressures.
The additive combination Microflux Trans in Tribol GR TT 1 PD adjusts to varying operating conditions and actively prevents wear.
The Tribol GR TT 1 PD can be applied:
- In rolling and sliding bearings.
- In clutch bearings and wheel hubs.
- For bearings running at high speeds wh an x dm factor up to about 1 mio.
- For low-temperature applications.
The application temperature range for Tribol GR TT 1 PD is between -60 °C (-76 °F) and +120 °C (+248 °F).
Typical characteristics:
Specification: KPE1K-60
Consistency grade: NLGI 1
Base oil type: synthetic
Thickener type: both organic and inorganic
Base oil viscosity at 40 °C (104 °F): 15 mm2/sec
Worked penetration, 60 strokes at 25 °C (77 °F): 310-340 (0.1 mm)
Dropping point: 300 °C (572 °F)
Flow pressure at -35 °C (-31 °F): 235 hPa
Oil separation, 168 hours at 40 °C (104 °F): 5.5 %wt
Tribol GR TT 1 PD was previously called CASTROL Optitemp TT 1. Its name was changed in 2015.
Substituierbare Produkte