CASTROL Aircol PD 150
Air Compressor Oils
Aircol PD 150 is suitable for sliding vane compressors, or for reciprocating units operating at high ambient temperatures.
Aircol PD lubricants, the whole product line, are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially oil-flooded screw types with delivery temperatures of up to 120°C.
In compliance with ISO 6743-3:2003 standard, they can be used for up to 2000 operating hours if the delivery temperature does not exceed 100 °C.
Aircol PD 150 can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743.
Normal duty is described as:
- Discharge temperatures: ≤165°C
- Differential pressures: ≤2.5 MPa (25 bar)
- Discharge pressures: ≤7.0 MPa (70 bar)
Severe Duty is described as:
- Discharge temperatures: >165°C
- Differential pressures: >2.5 MPa (25 bar)
- Discharge pressures: >7.0 MPa (70 bar)
Aircol PD product line meets the requirements for appropriate viscosity grade of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.
Aircol PD 150 is fully compatible with nitrile, silicone and fluoropolymer seal materials.
Performance claims and approvals:
DIN 51506 VD-L
ISO 6743-3 Compressor Oils
DAA and DAB for reciprocating air compressors
DAG for rotary compressors
Atlas Copco (2000 hour oil)
Compair
Typical characteristics:
Kinematic viscosity at 40 °C (104 °F): 150 mm2/sec - ISO VG 150
Kinematic viscosity at 100 °C (212 °F): 14.5 mm2/sec
Viscosity index: 98
Flash point, closed cup: >200 °C
Conradson carbon residue after ageing, DIN 51352/2: <3.0 %
Aircol PD lubricants, the whole product line, are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially oil-flooded screw types with delivery temperatures of up to 120°C.
In compliance with ISO 6743-3:2003 standard, they can be used for up to 2000 operating hours if the delivery temperature does not exceed 100 °C.
Aircol PD 150 can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743.
Normal duty is described as:
- Discharge temperatures: ≤165°C
- Differential pressures: ≤2.5 MPa (25 bar)
- Discharge pressures: ≤7.0 MPa (70 bar)
Severe Duty is described as:
- Discharge temperatures: >165°C
- Differential pressures: >2.5 MPa (25 bar)
- Discharge pressures: >7.0 MPa (70 bar)
Aircol PD product line meets the requirements for appropriate viscosity grade of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.
Aircol PD 150 is fully compatible with nitrile, silicone and fluoropolymer seal materials.
Performance claims and approvals:
DIN 51506 VD-L
ISO 6743-3 Compressor Oils
DAA and DAB for reciprocating air compressors
DAG for rotary compressors
Atlas Copco (2000 hour oil)
Compair
Typical characteristics:
Kinematic viscosity at 40 °C (104 °F): 150 mm2/sec - ISO VG 150
Kinematic viscosity at 100 °C (212 °F): 14.5 mm2/sec
Viscosity index: 98
Flash point, closed cup: >200 °C
Conradson carbon residue after ageing, DIN 51352/2: <3.0 %