CASTROL Tribol CH 1430
Chain Oils
The Tribol CH 1430 high-temperature chain oil is formulated for the lubrication of oven chains. The low evaporation tendency of the high-quality aromatic ester synthetic base fluid ensures extended lubrication intervals as well as a clean and economic application. The viscosity of Tribol CH 1430 delivers excellent wetting of chain pins at temperatures even upto 240°C with short term maximum temperature of 270 °C. The product contains anti-wear additives for additional protection in the areas of boundary and mixed friction lubrication and at high operating temperatures. Rust and oxidation inhibitors protect chains from corrosion at standstill and extend the lubricant's life.
It is used for the lubrication of oven chains in lithographic printing plants and in the coating industry as well as in drying ovens in the automotive industry.
It may be applied by drip, spray, splash and pressurized lubricating systems compatible with oils of this viscosity.
With Tribol CH 1430, fire and explosion hazards are greatly reduced. The ignition temperature far exceeds that of petroleum products.
It is compatible with the following sealing materials: fluoroelastomers, silicone rubber, nitrile rubber (with more than 30%, acrylonitrile) and EPDM-elastomers. Do not use Tribol CH 1430 high-temperature chain oil with seals under made of chloroprene rubber.
br>Tribol CH 1430 is also available in 400 ml spray - the 'S' version in the packaging list. The propellent used in Tribol CH 1430 Spray is a propane/butane mix.
Typical characteristics:
Viscosity at 40 °C (104 °F): 150 mm2/sec
Viscosity at 100 °C (212 °F): 17.1 mm2/sec
Viscosity index: 124
Flash point, open cup method: 268 °C (514 °F)
Pour point: -33 °C (-27 °F)
Four Ball Wear test, Wear Scar Diameter, 300N over 1 hr: <0.3 mm
It is used for the lubrication of oven chains in lithographic printing plants and in the coating industry as well as in drying ovens in the automotive industry.
It may be applied by drip, spray, splash and pressurized lubricating systems compatible with oils of this viscosity.
With Tribol CH 1430, fire and explosion hazards are greatly reduced. The ignition temperature far exceeds that of petroleum products.
It is compatible with the following sealing materials: fluoroelastomers, silicone rubber, nitrile rubber (with more than 30%, acrylonitrile) and EPDM-elastomers. Do not use Tribol CH 1430 high-temperature chain oil with seals under made of chloroprene rubber.
br>Tribol CH 1430 is also available in 400 ml spray - the 'S' version in the packaging list. The propellent used in Tribol CH 1430 Spray is a propane/butane mix.
Typical characteristics:
Viscosity at 40 °C (104 °F): 150 mm2/sec
Viscosity at 100 °C (212 °F): 17.1 mm2/sec
Viscosity index: 124
Flash point, open cup method: 268 °C (514 °F)
Pour point: -33 °C (-27 °F)
Four Ball Wear test, Wear Scar Diameter, 300N over 1 hr: <0.3 mm