Discontinued Product
CASTROL Longtime PD 00
Industrial Greases and Pastes
Longtime PD 00 can be used as a semi-fluid grease lubricant in gears such as flange, drum-type and worm gears. It is also suitable for use in gears without oil-tight enclosures, gear wheels and rolling bearings with a grease reservoir.
It has extremely low coefficients of friction which is generating energy savings and reduced noise levels.
Longtime PD 00 has exceptional water-resistance, therefore the coating film stays on the surface even in presence of water; even when exposed to the action of hot and chemically active process water.
Castrol Longtime PD greases, the whole product line, are lithium based greases containing highly refined mineral oils and fortified with the Microflux Trans (MFT) additive system. The MFT additive technology provides optimum wear protection and an extremely low coefficient of friction even under extremes of pressure, vibration, shock loads, at high or low speeds or varying microsmoothing of the friction surfaces. Under severe load, components of the MFT additive combination are activated and diffuse into the surfaces initiating an improvement of their friction characteristics through plastic deformation. The organic reaction products become a component of the tribopolymer system. Unlike the case with conventional lubricants, the tribopolymers formed by MFT are long-chained compounds with excellent lubricity and adhesion. The load carrying area is improved, a hydrodynamic lubrication film is easier to maintain. This unique physio-chemical reaction achieves a nonsacrificial micro-smoothing of the friction surfaces.
Performance claims:
NLGI grade: 00
DIN classification: KP00N-40
ISO classification: LXDDHB-00
Typical characteristics:
Worked penetration, 60 strokes at 25 °C (77 °F): 400 - 430 (0.1 mm)
Base oil viscosity at 40 °C (104 °F): 130 mm2/sec
Copper corrosion, 24 hours at 100 °C (212 °F): 1b
Flow pressure at -35 °C (-31 °F): 500 mbar
SRV Friction and Wear test, 400N, 2hr, 50°C: 0.08 coeff. of friction / 0.65 mm wear scar diam.
Longtime PD 00 was renamed in 2015, it is now called CASTROL Tribol GR 100-00 PD.
It has extremely low coefficients of friction which is generating energy savings and reduced noise levels.
Longtime PD 00 has exceptional water-resistance, therefore the coating film stays on the surface even in presence of water; even when exposed to the action of hot and chemically active process water.
Castrol Longtime PD greases, the whole product line, are lithium based greases containing highly refined mineral oils and fortified with the Microflux Trans (MFT) additive system. The MFT additive technology provides optimum wear protection and an extremely low coefficient of friction even under extremes of pressure, vibration, shock loads, at high or low speeds or varying microsmoothing of the friction surfaces. Under severe load, components of the MFT additive combination are activated and diffuse into the surfaces initiating an improvement of their friction characteristics through plastic deformation. The organic reaction products become a component of the tribopolymer system. Unlike the case with conventional lubricants, the tribopolymers formed by MFT are long-chained compounds with excellent lubricity and adhesion. The load carrying area is improved, a hydrodynamic lubrication film is easier to maintain. This unique physio-chemical reaction achieves a nonsacrificial micro-smoothing of the friction surfaces.
Performance claims:
NLGI grade: 00
DIN classification: KP00N-40
ISO classification: LXDDHB-00
Typical characteristics:
Worked penetration, 60 strokes at 25 °C (77 °F): 400 - 430 (0.1 mm)
Base oil viscosity at 40 °C (104 °F): 130 mm2/sec
Copper corrosion, 24 hours at 100 °C (212 °F): 1b
Flow pressure at -35 °C (-31 °F): 500 mbar
SRV Friction and Wear test, 400N, 2hr, 50°C: 0.08 coeff. of friction / 0.65 mm wear scar diam.
Longtime PD 00 was renamed in 2015, it is now called CASTROL Tribol GR 100-00 PD.