Recommended
CASTROL Spheerol EPL 1
Industrial Greases and Pastes
Spheerol EPL 1 is a general-purpose grease for plant-wide applications. It has been formulated with additives that provide good film strength under medium to high loads.
Spheerol EPL 1 offers good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are expected.
It has high mechanical stability; hence the grease keeps its consistency in service ensuring long lubricant life. Spheerol EPL 1 has good adhesion, so it provides continuous lubrication, and reduced consumption as the film stays between lubricated surfaces. It is resistant to copper and steel corrosion which helps prevent rust and oxidation on metal surfaces.
Spheerol EPL 1 also has excellent EP and anti-wear properties to protect the equipment against extreme loading and to minimise bearing component wear.
The operating temperature range for this grease lies between -25 °C and + 120 °C.
Technical data:
Consistency grade: NLGI 1
Base oil type: mineral oil
Thickener type: lithium
Worked penetration, 60 strokes at 25 °C (77 °F): 310-340 (0.1 mm)
Base oil viscosity at 40 °C (104 °F): 150-200 mm2/sec
Dropping point: 190 °C (374 °F)
Four Ball Weld Load test, Weld Point: min. 250 kgf
Four Ball Wear test, Wear Scar Diameter, 40 kgf/75 °C/1200 rpm/1 hr: max. 1 mm
Spheerol EPL 1 offers good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are expected.
It has high mechanical stability; hence the grease keeps its consistency in service ensuring long lubricant life. Spheerol EPL 1 has good adhesion, so it provides continuous lubrication, and reduced consumption as the film stays between lubricated surfaces. It is resistant to copper and steel corrosion which helps prevent rust and oxidation on metal surfaces.
Spheerol EPL 1 also has excellent EP and anti-wear properties to protect the equipment against extreme loading and to minimise bearing component wear.
The operating temperature range for this grease lies between -25 °C and + 120 °C.
Technical data:
Consistency grade: NLGI 1
Base oil type: mineral oil
Thickener type: lithium
Worked penetration, 60 strokes at 25 °C (77 °F): 310-340 (0.1 mm)
Base oil viscosity at 40 °C (104 °F): 150-200 mm2/sec
Dropping point: 190 °C (374 °F)
Four Ball Weld Load test, Weld Point: min. 250 kgf
Four Ball Wear test, Wear Scar Diameter, 40 kgf/75 °C/1200 rpm/1 hr: max. 1 mm