CASTROL Tribol GR 400 - 2 PD
Industrial Greases and Pastes
Tribol GR 400-2 PD is used for long-term lubrication, even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range in highly loaded rolling and sliding bearings. It can also be used for open gear wheels and worm gears operating at low speeds.
This grease based on mineral oil and lithium soap, enhanced with Castrol's MicroFlux Trans (MFT) additive system.
With its performance, Tribol GR 400-2 PD can be used for extended service life, and even for lifetime lubrication in some cases. It has outstanding load bearing capacity, aging characteristics and shear-stability.
This grease is resistant both to hot and cold water, and dirt.
Typical characteristics:
NLGI grade: 2
Base oil viscosity at 40 °C (104 °F): 350 mm2/sec
Worked penetration, 25 °C (77 °F), 60 strokes: 265 - 295 (0.1 mm)
Worked penetration, 25 °C (77 °F), 100 000 strokes: 35 (0.1 mm) - change from 60 strokes
Operating temperature range: -30 °C (-22 °F) to +140 °C (+284 °F)
Dropping point: >180 °C (356 °F)
Tribol GR 400-2 PD was previously called Castrol Olista Longtime 2, its name was changed in 2015.
This grease based on mineral oil and lithium soap, enhanced with Castrol's MicroFlux Trans (MFT) additive system.
With its performance, Tribol GR 400-2 PD can be used for extended service life, and even for lifetime lubrication in some cases. It has outstanding load bearing capacity, aging characteristics and shear-stability.
This grease is resistant both to hot and cold water, and dirt.
Typical characteristics:
NLGI grade: 2
Base oil viscosity at 40 °C (104 °F): 350 mm2/sec
Worked penetration, 25 °C (77 °F), 60 strokes: 265 - 295 (0.1 mm)
Worked penetration, 25 °C (77 °F), 100 000 strokes: 35 (0.1 mm) - change from 60 strokes
Operating temperature range: -30 °C (-22 °F) to +140 °C (+284 °F)
Dropping point: >180 °C (356 °F)
Tribol GR 400-2 PD was previously called Castrol Olista Longtime 2, its name was changed in 2015.