CASTROL Alphasyn EP 320
Industrial Gear Oils
Alphasyn EP 320 is a high-quality synthetic lubricant which has been formulated for use in all types of enclosed gears including heavy loaded / shock-loaded gears and bearings where EP properties are required. It is suitable for use in gearboxes where micropitting resistance is required and for a wide range of applications in extreme environments.
Alphasyn EP 320 is based on polyalpha-olefin (PAO) fluids and sulphur / phosphorus extreme pressure (EP) additive technology providing outstanding thermal stability and high load carrying capacity.
The use of a PAO basestock provides inherently high Viscosity Index (VI) and low pour points making this product suitable for use over a wide temperature range.
Applications:
- Heavily loaded gearboxes subjected to extremes of temperature
- Draw works transmissions on Mobile Offshore Drilling Units and Onshore sites
- Top Drives on Mobile Offshore Drilling Units and Onshore sites
Alphasyn EP 320 meets the requirements of:
DIN 51517 Part 3 - CLP
AGMA 9005 - D94
US Steel 224
David Brown Type E
Hansen Transmissions
Flender
Lohmann & Stofferfoht
This lubricant is fully compatible with nitrile, silicone and fluoropolymer seal materials.
Technical data:
Viscosity at 40 °C (104 °F): 326 mm2/sec - ISO VG 320
Viscosity at 100 °C (212 °F): 35.5 mm2/sec
Viscosity index: 155
Pour point: -42 °C (-44 °F)
Flash point, open cup method: 242 °C (468 °F)
Foam sequence I, tendency/stability: 20 ml / 0 ml
FZG Gear Scuffing Test, A/8.3/90: >14
FZG Gear Scuffing Test, A/16.6/90: >14
FZG Micropitting test at 90°C (194°F): >10 (High)
FE-8 Bearing Wear test, roller weight loss: <5 mg
Alphasyn EP 320 is based on polyalpha-olefin (PAO) fluids and sulphur / phosphorus extreme pressure (EP) additive technology providing outstanding thermal stability and high load carrying capacity.
The use of a PAO basestock provides inherently high Viscosity Index (VI) and low pour points making this product suitable for use over a wide temperature range.
Applications:
- Heavily loaded gearboxes subjected to extremes of temperature
- Draw works transmissions on Mobile Offshore Drilling Units and Onshore sites
- Top Drives on Mobile Offshore Drilling Units and Onshore sites
Alphasyn EP 320 meets the requirements of:
DIN 51517 Part 3 - CLP
AGMA 9005 - D94
US Steel 224
David Brown Type E
Hansen Transmissions
Flender
Lohmann & Stofferfoht
This lubricant is fully compatible with nitrile, silicone and fluoropolymer seal materials.
Technical data:
Viscosity at 40 °C (104 °F): 326 mm2/sec - ISO VG 320
Viscosity at 100 °C (212 °F): 35.5 mm2/sec
Viscosity index: 155
Pour point: -42 °C (-44 °F)
Flash point, open cup method: 242 °C (468 °F)
Foam sequence I, tendency/stability: 20 ml / 0 ml
FZG Gear Scuffing Test, A/8.3/90: >14
FZG Gear Scuffing Test, A/16.6/90: >14
FZG Micropitting test at 90°C (194°F): >10 (High)
FE-8 Bearing Wear test, roller weight loss: <5 mg